Por 15 Top Coat Spray Instructions

Next apply the second coat of por 15.

Por 15 top coat spray instructions.

Using a pouring spout dispense a portion into a separate container and seal can at once keeping lid and grooves clean. Instead por 15 top coat chassis black chemically bonds with por 15 rust. Be sure to read thoroughly our directions and tip sheets regarding topcoating before using por 15. Por 15 will accept all paints including lacquer based paints.

The ultimate in rust corrosion protection prevention. Use 25 30 lbs 170kpa 210pa. Por 15 is the trusted brand in the automotive restoration paint coatings industry for quality superior durability customer service. Por 15 top coat chassis black is a semi gloss black topcoat for por 15 rust preventive coating and other paints as well.

It provides professional grade rust protection. Top coat is available in liquid or aerosol spray formulas comes in a variety of colors including osha compliant safety colors. Surface preparation and then apply por 15 top coat. Organic vapor particulate respirators niosh msha approved must be used when spraying por 15.

Stir por 15 top coat before and during use do not shake. Top coat application over por 15 prior to finish paint if using primer. Sandpaper until gloss is dulled. Wet sand with 320 grit until gloss is dull then paint or use por 15 tie coat primer directly on the cured por 15 surface then topcoat as desired.

Do not paint out of can. Using a pouring spout dispense a portion into a separate container and seal can at once keeping lid and grooves clean. Stir por 15 top coat before and during use do not shake. After second coat of por 15 has been applied wait approximately 45 minutes to 1 hour until the por 15 coating is tacky.

Apply por 15 top coat in two thin covering coats. Do not paint out of can. Enter your postal code and country to list dealers in your area. Known for the unbeatable por 15 rust preventive 3 step stop rust system por 15 offers a wide variety of specialty paints coatings for vehicle restoration concrete floors more.

Why you should always buy from a por 15. Surface preparation and then apply por 15 top coat. Por 15 tie coat primer is the best prime coat to use before topcoating por 15. Then apply a light dust coat of primer and let dry.

Use por 15 solvent or lacquer thinner for cleanup which must be done before por 15 dries. For a list of authorized dealers online click online stores. Can i use body filler or putty with por 15. Apply por 15 top coat in two thin covering coats.

Use 25 30 lbs 170kpa 210pa. Por 15 top coat dtm paint may be applied directly to a clean prepped bare metal surfaces.